Table of Contents
Advertisement
WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)
EN2Z-1077GE51 R0621
Disabling the DHCP switch will allow you to enter the IP-Address manually. After
you press Save, the manually entered IP address will be used for the device.
NOTE: The device has an internal firewall which blocks all incoming network traffic,
including ICMP ping requests. Therefore, you can't ping the device to test
the network connectivity.
The device is now correctly configured to load the homepage you entered.
Therefore, you can close the setup menu to access the homepage by clicking EXIT
in the System Settings list. Depending on the Web Browser configuration "On
Startup", the application gets directly opened or you need to press Load Homepage
on the Settings Page.
8
Finish Quick start
Advertisement
Table of Contents
