Epg (Electronic Programme Guide); Timer Reservation; Game; Additional Functions - AEG DVBT 4538 Instruction Manual

AEG_BDA_DVB_T4538_GB_ka1.qxd:CL_BDA_DVB_T776_GB_ka.qxd
Take size into consideration when saving your
image files, as pictures that are too large may
be displayed either very slowly or not at all. At
best, the size of the pictures equals the size of
the picture format of the reproducer. Usually,
this size of TVs is 1024x576 pixels (aspect
ratio 16:9) or 768x576 (aspect ratio 4:3).
Please note that any conversion usually leads to
information loss with regard to the original format.

EPG (Electronic Programme Guide)

Your digital receiver is equipped with an electronic
programme guide. With this feature you can view
the programme information of one or more pro-
grammes on the display. You can get an overview
on the currently running broadcasts or on the bro-
adcasts of the day.
The EPG features enable you to:
• view information on programme contents on the
display (Detail);
• to preselect broadcasts to be automatically swit-
ched on when they start;
• to programme broadcasts (Book).
This function can only be used if it is suppor-
ted by the selected station.
In order to display the Electronic Programme
Guide, press the "EPG" button.
The Electronic Programme Guide is displayed. On
the left side of the screen you will see the channel
list and on the right side the list of programmes. In
the upper section the current date is displayed
together with a miniature picture of the programme
that is currently on.
Please note the messages at the bottom edge of
the screen for further instructions. The coloured
buttons on the remote control correspond to those
on the screen.
Press the "EXIT" button in order to hide the
window.
Preselection/programming of broadcasts:
Press the EPG key. The Programme Overview
window will be displayed.
With the arrow keys ▼ CH-, ▲ CH+,
VOL- you can select the channel or the des-
ired programme.
Press the "red" button. A new window is opened.
Press the "OK" button in order to adopt the set-
tings.
Press the 'EXIT' key to return to the TV programme.
If the start time of the selected broadcast has been
reached, the device switches to this broad-
cast/channel.
To change the data predefined by the channel
(start/end time, etc.) select the corresponding
line using the "▼ CH-" and "▲ CH+" arrow
keys.
Time Reservation
The receiver can be programmed to switch to a
specific channel at the desired time. This function
can be used e.g. to record a programme using the
video recorder. Furthermore, you can programme
the receiver in a way that it switches on or off or
that a short message is displayed at a specific time.
Set the timer as follows:
In the "SETUP" menu select the "Advance Timer"
submenu.
Use the arrow buttons "▼ CH-" or "▲ CH+" to
select a free timer position.
Press the "red" button (Edit) to call up the editing
window.
Select the individual lines using the "▼ CH-" or
"▲ CH+" arrow buttons.
Adjust the settings with the "
arrow buttons and the number buttons.
Press the "OK" button to activate the timer.
Press the "EXIT" button in order to return to the
TV programme.
With the "green" button (Del) you can delete a
timer storage location.

Game

You can choose between the "Gomoku" game and
the "Calendar" and "Calculator". Make your selec-
tion and follow the instructions at the bottom edge
of the screen.

Additional functions

Displaying information
This function is only available if the station bro-
adcasts corresponding data.
You may display the following information on the
current channel.
To display additional information on the screen,
press the "INFO" key.
Press the "INFO" button twice in order to
display details on the current programme such
VOL+,
as frequency, band width, etc.
To return to the normal screen display, press the
"INFO" key again.
Show Channel List
Press the „OK" key to view the list of TV of radio
channels (depending on the type of use).
Now mark a station using the "▼ CH-" or
"▲ CH+" arrow keys.
16.04.2009 10:48 Uhr
VOL+" and " VOL-"
Seite 43
43