Commissioning; Initial Installation; Remote Control - AEG DVBT 4538 Instruction Manual

AEG_BDA_DVB_T4538_GB_ka1.qxd:CL_BDA_DVB_T776_GB_ka.qxd
Connection schematic

Commissioning

Insert the mains plug of the receiver in a regula-
tion power socket with PE for 230 V, 50 Hz.
Press the power switch „ " on the front side of
the device.
Insert the connected devices' mains plug into the
mains socket and switch these on.
Switch on the AV channel on the TV set.
Please refer to your TV set's operating instruc-
tions for information on how to switch the "AV"
channel on.

Initial Installation

The first time the device is switched on the start win-
dow of the installation assistant appears. With the
help of the installation menu you can easily make
the most important adjustments to the receiver.
Use the "▼ CH-" or "▲ CH+" arrow keys to
select the desired option. Select by using the
" VOL+" or "
automatic channel search with the "red" button.
As soon as the Installation assistant has finished
the search run (100%), the device switches to TV
mode.
34
I
VOL-" arrow buttons. Start the
16.04.2009

Remote control

The remote control requires two Micro LR 03/AAA
1.5 V batteries.
Open the battery compartment.
Insert two batteries into the battery compartment,
observing the specified polarity.
Carefully close the battery compartment lid again
until the lid engages.
Replace dying batteries within good time.
It is not permitted to use odd batteries or new
and used batteries together.
If a battery has leaked, put on protective gloves
and clean the battery compartment with a dry
cloth.
Attention!
Batteries may contain toxins which cause damage
to the environment. Batteries must therefore be
disposed of according to the applicable legal
regulations under all circumstances. Never dispo-
se of batteries in normal domestic waste. Never
place the batteries in fire.
10:48 Uhr Seite 34