Switching On And Off; Carrying Out Basic Settings; Navigating In Menus And Sub-Menus - AEG DVBT 4538 Instruction Manual

AEG_BDA_DVB_T4538_GB_ka1.qxd:CL_BDA_DVB_T776_GB_ka.qxd
Nr. Symbol
9 Green
10 VIDEO
Blue
11 TV/Radio
12 PAUSE II
13 TEXT
14 OK
15 VOL-
VOL+
16 MENU
17 EPG
18 AUDIO
19 FAV
20 0-9
21 STANDBY

Switching on and off

In order to switch the device on or off, press the
I
„ " on/off power switch on the device.
In order to switch between standby and operatio-
nal mode, press the „STANDBY " button on the
remote control.

Carrying out basic settings

Navigating in menus and sub-menus

In order to switch between the menu options,
press the " VOL+,
buttons on the remote control.
When you have selected an option in the submenu,
your selection is highlighted in yellow.
To confirm the selected menu option, press the
"OK" key.
The settings for this menu option are displayed.
To move from one setting to the next, press the
"▼ CH-" and "▲ CH+" arrow keys.
36
Erklärung
In various menus for activating the function displayed.
– Direct switching over of the video output.
– In various menus for activating the function displayed.
Switching between radio and TV, if radio is available
– Switching to freeze-frame whilst watching television
– In various menus for activating the function displayed.
Activating teletext
– Confirming the menu or a menu option
– Displaying the list of stations
– lower volume.
– menu option to the left.
– Move to the left in the zoomed picture.
– raise volume.
– menu option to the right.
– Move to the right in the zoomed picture.
Calling up the menu, carrying out basic settings
Electronic Programme Guide
Shows the audio menu.
Calling up the list of favourites.
Directly selecting the channel, entering digits.
I
Switching on and switching to standby mode
I
VOL-, ▼ CH-, ▲ CH+"
16.04.2009
The selected setting is marked.
By pressing the OK key you jump to the settings
menu.
You may:
- switch between the options with the "
▼ CH-, ▲ CH+, VOL+ " arrow keys.
- use the numerical keys to enter numbers if the
setting requires a numerical input.
Press the EXIT key to change back to the last
menu level.
In order to exit the main menu, press the "EXIT"
button repeatedly.
The on-screen menu is closed and the screen is
switched to TV or radio mode.
The system settings must be adjusted to enable you
to use the receiver's full range of functions (see the
following Chapter).
Press the "MENU" key on the remote control.
10:48 Uhr Seite 36
VOL-,