Important Installation Information; Set Up & Use - Black & Decker BCW27MW Instruction Manual

ENGLISH
SET UP & USE

IMPORTANT INSTALLATION INFORMATION

1. This unit must be properly installed and located according to the installation
instructions before it is used.
2. Store and install the washer where it will not be exposed to temperatures below
freezing or exposed to outdoor weather conditions. This could damage the unit
and void the warranty.
3. The (red) hot water hose should be connected to the (red) hot water inlet and
the (blue) cold water hose should be connected to the (blue) cold water inlet.
4. The washer dryer combo unit must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and
ordinances. Follow all installation instructions.
5. The unit should be installed on a level floor with a maximum slope of 1" (25 mm).
WHEN NOT IN USE
Turn off the water supply when the unit is not in use in case of leaking or ruptured
hoses. It is recommended to replace the hoses every 5 years.
Page 6