Honeywell HUS-NVR-1032/6032-E User Manual page 54

System Operation and Configuration
46
3. Click window layout icons in the top right corner to select the layout;
4. Click to select the camera in the pop-up window as shown in the following figure:
Figure 5-33 Add Camera
5. Click on the right side of the above window to continue adding slide;
6. Click Duration to select the time interval between two slides;
7. Click Save to create the patrol in the "Patrol List" window
Editing a Patrol
To edit a patrol, select a patrol in the "Patrol List"
edit window (Figure 5-32). Refer to step 3 and 4 of
Remove Patrol
To remove a patrol, select a patrol in the "Patrol List"
Preview Patrol
To preview a patrol, select a patrol in the "Patrol List"
"Patrol Preview" window is displayed as shown in the following figure:
Figure 5-34 Patrol Preview
(Figure 5-30).
(Figure 5-30) and click Edit to enter the
"Creating a Patrol "to edit a patrol.
(Figure 5-30) and click Remove.
(Figure 5-30) and click Preview, the