Honeywell HUS-NVR-1032/6032-E User Manual page 42

System Operation and Configuration
34
Figure 5-9 Advanced Settings
After the settings are finished, click OK and the added camera is displayed in the "Devices"
list.
Search
1. Click "Search" tab and select camera's type from the dropdown list as shown in the
following figure:
Figure 5-10 Search Camera
2. Click Search and then all the cameras of this type are listed. Click
down.
3. Check the target camera checkbox. Click Quick Add, when the pop-up window is
displayed, click OK to add the selected cameras to the "Devices" list; or click Next to
manually edit the parameters, see Figure 5-8.
to turn page