System Operation and Configuration
36
4.
Select USB device and target file (CVS file) and click Importto enter the "Choose
Cameras" window as shown in the following figure:
Figure 5-13 Choose Cameras
5.
Check the target camera and click
6.
Click Add, when the pop-up window is displayed, click OK to add target cameras to the
"Devices" list.
Editing a Camera
Select a camera in the "Devices" list
the following screen is displayed. You can modify the camera's access parameters on this
screen.
Figure 5-14 Editing a Camera
to turn page down.
(Figure
5-7) and click
in the bottom right corner and