shared between the external RADIUS server and the Switch. This key
is not sent over the network. This key must be the same on the external
RADIUS server and the Switch.
Second Radius
This is the backup server used only when the Primary Radius Server
Server
is down.
Global Status
State
This field displays if 802.1x authentication is Enabled or Disabled.
Authentication
This field displays if the authentication method is Local or RADIUS.
Method
Guest VLAN
The field displays the guest vlan.
Primary Radius
This field displays the IP address, UDP port and shared key for the
Server
Primary Radius Server. This will be blank if nothing has been set.
Secondary Radius
This is the backup server used only when the Primary Radius Server
Server
is down.
Apply
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
Refresh
91