After Use, Storage; Troubleshooting - Honeywell HWM6530I User Manual

AFTER USE, STORAGE

1. Store vacuum cleaner in temperatures above 32°F / 0°C.
2. See Figure 10.
a. All the accessories can be stored on the machine.
b. Place the nozzle in the holder (A)
WARNING:
TROUBLE SHOOTING
Repair or service of electrical components such as cord or motor, must only be carried out by an
authorized service center.
Vacuum cleaner does not
start:
Motor stops:
Suction power is reduced:
When not in use: disconnect the power cord from the electrical
outlet.
Check to see that the plug is correctly inserted in the
electrical outlet and that there is power at receptacle.
A circuit breaker may have tripped. Check the circuit breaker
box.
The cord or plug may be damaged. Call the Customer
Service Department to get the nearest authorized service
center.
A thermal overload protector will shut off the motor if the motor
temperature is too high. If this occurs, turn the switch off. Wait
5 minutes for the motor to cool. Turn switch on and resume
operation.
The tank may be full and needs to be emptied. See Figure 7.
The wands, hose and nozzles may be clogged and need to
be cleaned.
Any of the above may be damaged and need to be replaced.
Figure 10
10