Table of Contents
Advertisement
Quiet Boot
Configuration options: [Disabled] [Enabled]
Fast Boot
Allows you to enable or disable boot with initialization of a minimal set of devices
required to launch active boot option. This has no effect for BBS boot options.
Configuration options: [Disabled] [Enabled]
[Enabled]
[Disabled]
Boot mode select
Configuration options: [LEGACY] [UEFI]
FIXED BOOT ORDER Priorities
Boot Option #1(~10)
Allows you to set the system boot order. Configuration options: [Hard Disk] [NVME]
[CD/DVD] [SD] [USB Hard Disk] [USB CD/DVD] [USB Key:UEFI: Generic-SD/MMC,
Partition 1] [USB Floppy] [USB Lan] [Network] [Disabled]
UEFI USB Key Drive BBS Priorities
Boot Option #1
Allows you to set the system boot order.
Configuration options: [UEFI: Generic-SD/MMC, Partition 1] [Disable]
3.7
Exit menu
The items in the Exit menu allow you to save or discard your changes to the BIOS items.
Save Changes and Exit
Allows you to exit the system setup program after saving the changes.
Discard Changes and Exit
Allows you to exit the system setup program without saving the changes you made. When
you select this option or if you press <Esc>, a confirmation window appears. Select Yes to
discard changes and exit.
Save Changes and Reset
Allows you to reset the system setup after saving the changes.
Discard Changes and Reset
Allows you to reset the system setup without saving the changes you made.
Save Options
Save Changes
Allows you to save changes done so far to any of the setup options.
Discard Changes
Allows you to discard changes done so far to any of the setup options.
3-22
Select to accelerate the boot speed.
Select to go back to normal boot speed.
Chapter 3: BIOS setup
Advertisement
Table of Contents
