Table of Contents
Advertisement
3.3.2
Trusted Computing
Security Device Support
Allows you to enable or disable BIOS support for security device. Configuration
options: [Disable] [Enable]
The following items appear when a TPM device is installed on your motherboard.
SHA-1 PCR Bank
Configuration options: [Disabled] [Enabled]
SHA256 PCR Bank
Configuration options: [Disabled] [Enabled]
SHA384 PCR Bank
Configuration options: [Disabled] [Enabled]
Pending operation
Allows you to schedule an operation for security device. Configuration options: [None] [TPM
Clear]
Your computer will reboot during restart in order to change the state of security device.
Platform Hierarchy
Configuration options: [Disabled] [Enabled]
Storage Hierarchy
Configuration options: [Disabled] [Enabled]
Endorsement Hierarchy
Configuration options: [Disabled] [Enabled]
TPM 2.0 UEFI Spec Version
Allows you to select the TCG2 Spec Version support. Configuration options: [TCG_1_2]
[TCG_2]
[TCG_1_2]
[TCG_2]
Physical Presence Spec Version
Allows you to select to tell O.S. to support PPI Spec Version 1.2 or 1.3. Configuration options:
[1.2] [1.3]
Some HCK tests might not support 1.3.
3-4
Support the compatible mode for Win8/Win10.
Support new TCG2 protocol and event format for Win10 or later.
Chapter 3: BIOS setup
Advertisement
Table of Contents
