Table of Contents
Advertisement
Parallel Port Configuration
This item allows you to set parameters of Parallel Port (LPT/LPTE).
Parallel Port
Allows you to enable or disable the serial port (COM).Configuration options:
[Disabled] [Enabled]
Change Settings
Allows you to select an optimal setting for Super IO Device. Configuration
options: [Auto] [IO=378h; IRQ=5;] [IO=378h; IRQ=5, 6, 7, 9, 10, 11, 12;]
[IO=278h; IRQ=5, 6, 7, 9, 10, 11, 12;] [IO=3BCh; IRQ=5, 6, 7, 9, 10, 11, 12;]
Device Mode
Allows you to change the printer port mode. Configuration options: [STD
Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP
Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode]
3.3.9
Serial Console Redirection
COM1~COM6
Console Redirection
Allows you enable or disable the console redirection feature. Configuration options:
[Enabled] [Disabled]
The following item is accessible when you set Console Redirection to [Enabled].
Console Redirection Settings
The settings specify how the host computer and the remote computer (which the user is
using) will exchange data. Both computers should have the same or compatible settings.
Terminal Type
Configuration options: [VT100] [VT100+] [VT-UTF8] [ANSI]
[VT100]
[VT100+]
[VT-UTF8]
[ANSI]
Bits per second
Allows you to select serial port transmission speed. The speed must be matched on
the other side. Long or noisy lines may require lower speeds. Configuration options:
[9600] [19200] [38400] [57600] [115200]
Data Bits
Configuration options: [7] [8]
3-12
ASCII char set.
Extends VT100 to support color, function keys, etc.
Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.
Extended ASCII char set.
Chapter 3: BIOS setup
Advertisement
Table of Contents
