Table of Contents
Advertisement
3.3.13
NVMe Configuration
The NVMe Configuration menu displays the NVMe controller and drive information of the
devices connected and allows you to configure NVMe device options settings.
3.3.14
Onboard Devices Configuration
HD Audio Controller
Allows you to control detection of the HD-Audio device. Configuration options:
[Enabled] [Disabled]
[Enabled]
[Disabled]
LAN1 I225
Configuration options: [Disabled] [Enabled]
Intel LAN1 OPROM
Allows you to launch Intel PXE OPROM. Configuration options: [Disabled] [Enabled]
LAN2 I219
Configuration options: [Disabled] [Enabled]
Intel LAN2 OPROM
Allows you to launch Intel PXE OPROM. Configuration options: [Disabled] [Enabled]
I2C0 Controller
Allows you to enable or disable the Serial IO Controller. Configuration options: [Disabled]
[Enabled]
WIFI (Wi-Fi Controller)
Allows you to enable or disable the WiFi controller. Configuration options: [Disabled]
[Enabled]
BT (Bluetooth Controller)
Allows you to enable or disable the bluetooth controller. Configuration options: [Disabled]
[Enabled]
3.3.15
EZ-Flash
This item allows you to enter EZ-Flash mode. After you press <Enter>, a confirmation
message appears. Use the left/right arrow key to select between [Yes] or [No], then press
<Enter> to confirm your choice.
3.3.16
APM Configuration
This item allows you to configure APM (Advanced Power Management) settings.
ErP Ready
Allows BIOS to switch off some power at S5 to get the system ready for ErP requirement.
When set to [Enabled], all other PME options will be switched off. Configuration options:
[Disabled] [Enabled]
ASUS EBE-4U
Enables the HD Audio Device unconditionally.
Disables the HD Audio Device unconditionally.
3-17
Advertisement
Table of Contents
