Ordering Information - Honeywell CD3000M-1ph User Manual

User's Manual

3. Ordering information

Model CD3000M 1PH
CD3000M-1PH
Ex:CD3000M 1PH/
1 Nominal current of CD3000M
15A 45A
25A 60A
35A 90A
2 Operating Load Voltage (incoming voltage supply)
Specify the value of the line supply.
3 Max VOLTAGE of CD3000M
480V
600V
The voltage on the identification label must be equal or more than
operating voltage. The minimum voltage supply to the load is 24V.
4 Auxiliary Voltage
230V 200÷230V ±15%; 10VA
460V 300÷460V ±15%; 10VA
600V 600V ±15%; 10VA (on request)
5 Input
SSR 4÷30VDC
0-10V 0÷10V analog input
4-20mA 4÷20mA analog input
10K pot Potentiometer
6 Firing
ZC Zero Crossing
SC Single Cycle
BF Burst firing. Specify the number on ON cycles at 50% of
power.
S+BF Soft Start + Burst Firing
PA Phase Angle. Soft Start and feedback in voltage are not
availables, just in supply compensation. If feedback is
necessary, you need to use CD3200.
DT Delayed Triggering + Burst Firing
7 Options
COMM MODBUS protocol in RS485 is standard
CD-KP External Keypad
HB Heater Break Alarm
FAN110 Fan voltage supply 110VAC ± 15% (std 230VAC ± 15%)
14W 50/60Hz
UL UL Certification
CD3000M-1PH up to 110A
1 2 3
400V 480V
90A/
/ /
110A
4 5 6
460V
SSR/ ZC/
/
7
7
UL
www.honeywell.com/imc
Honeywell