Hardware Installation; Connecting Up The Vigor Router - Draytek Vigor2765 Series Quick Start Manual
Vdsl2/g.fast security router
Hide thumbs
Also See for Vigor2765 Series:
- Quick start manual (31 pages) ,
- Quick start manual (19 pages) ,
- Quick start manual (24 pages)
Table of Contents
Advertisement
3
.
H
a
r
d
w
a
3
.
H
a
r
d
w
a
3
.
1
C
o
n
n
e
c
3
.
1
C
o
n
n
e
c
Here we take Vigor2765 as an example.
1.
ADSL/VDSL Connections: Connect the DSL port to the Modem or DSL port of the
external splitter/microfilter (not supplied) with the RJ-11 line cable. In some
cases, your RJ-11 DSL socket will be built-into your phone line socket on the wall
and you won't have a separate microfilter/splitter.
2.
LAN Connections: Connect a LAN port of the router to your computer or switch.
3.
Power Supply: Connect the power adapter to the Vigor 2765's PWR socket on
the rear and plug the power adapter into a suitable mains socket.
Turn the Vigor 2765 on using its power switch.
4.
The router will start up. After completing the system test, the ACT LED will light
up and start blinking once per second to indicate that it is ready for use.
For more detailed information of LED status, please refer to section 3.1 Front
Panel Overview.
5.
Ethernet-based Internet Connections: LAN port P4 can be switched to operate
as the Ethernet WAN port. This must be configured in the router's web interface
before it can operate in this mode – Section 5.3 of this Quick Start Guide details
how to do that.
r
e
I
n
s
t
a
l
l
a
r
e
I
n
s
t
a
l
l
a
t
i
n
g
u
p
t
h
e
V
t
i
n
g
u
p
t
h
e
V
t
i
o
n
t
i
o
n
i
g
o
r
R
o
u
t
e
r
i
g
o
r
R
o
u
t
e
r
3
Advertisement
Table of Contents
