NETGEAR Nighthawk RAX80 User Manual page 129

14. Click the Install button.
The window displays the progress of the installation and then displays the final installation
page.
15. Click the Finish button.
16. Unzip the configuration files that you downloaded and copy them to the folder where the
VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at C:\Program
files\OpenVPN\config\ by default.
17. For a client device with Windows, modify the VPN interface name to NETGEAR-VPN:
a. On your computer, go to the Networks page. If you are using Windows 10, select Control
Panel > Network and Sharing Center > Change adapter settings.
b. In the local area connection list, find the local area connection with the device name TAP-
Windows Adapter.
c. Select the local area connection and change its name (not its device name) to NETGEAR-
VPN.
UseVPNtoAccessYourNetwork
Nighthawk AX8 8-Stream AX6000 WiFi Router
129 User Manual