Table of Contents
Advertisement
o IMPORTANT: You should allow the oven to cool completely
before attempting to remove the grill deflector. If you
attempt to remove the grill deflector before the oven is
cool, the deflector will be hot.
Using and assembling the rotisserie
o Place the food on the spit (L); making sure that it is placed
centrally between the two forks (F). Otherwise excess strain will
be placed on the motor (R).
o Place one end of the spit (L) onto support (G) and put the
opposite end into the hole of the motor (P).
o Fill the drip tray with a little water and place this under the spit
(L).
o Fit the grill deflector (S) into position and leave the door half
way open.
o Light the gas grill (as described previously) and
then press the rotisserie on/off button (pictured
opposite).
14
Advertisement
Table of Contents
