Cisco 6825 Quick Start Manual

Your Handset
1 2
3
6 6
4
5
Legend
Indicator light (LED)
Emergency button
Headset port
Softkeys, phone control buttons (Speaker , Menu),
Navigation cluster (Navigation ring and Select button,
call control buttons (Answer/Send , Power/End )
Keypad
Volume and Mute buttons
Cisco IP DECT 6825 Handset Quick Start Guide
Turn On Your Handset
1 2
Press and hold Power/End
3
Turn O Your Handset
Press and hold Power/End
Lock the Handset Keypad
4
You can lock the handset keypad to stop accidental dialing.
When you lock the keypad, you can still dial emergency
numbers. The softkey label doesn't display when you lock
5
the keypad.
Press and hold Zero (0)
"Press and hold 0" is displayed on the screen.
Unlock the Handset Keypad
You must unlock the handset keypad to make calls. You
can however, dial emergency numbers from the locked
keypad. When you unlock the keypad, the softkey labels
appear..
Press and hold Zero (0)
"Press and hold 0" doesn't display on the screen.
Make a Call
1. When your handset is idle, enter the phone number
with the keypad.
2. Press Answer/Send
Report an Emergency Situation
(If con gured)
until the screen turns on.
Press and hold Emergency
Answer a Call
until the screen turns o .
Press Answer/Send
Hold and Resume a Call
1.
2.
Mute Your Call
until the message
1.
2.
Create a Conference Call
1.
2.
until the message
3.
Transfer a Call
1.
2.
3.
.
for 3 seconds.
.
From an active call, press Hold .
Press Resume to pick the call back up.
Press Mute .
To unmute yourself, press Mute again.
From an active call, press Conf.
Enter the coworker's number and press
Answer/Send .
Press Conf after the coworker answers.
From an active call, press Transfer .
Enter the coworker's number and press Answer/
Send .
Press Transfer after the rst ring tone or after your
coworker answers.