Cisco 6825 Quick Start Manual

Cisco 6825 IP DECT Handset Quick Start Guide
Your Handset
1 2
3
6 6
4
5
Legend
Indicator light (LED)
Emergency button
Headset port
Softkeys, phone control buttons (Speaker, Menu),
Navigation cluster (Navigation ring and Select button
Call Control buttons (Answer/Send, Power/End)
Keypad
Volume and Mute buttons
GoMomentum.com | 888.538.3960
1 2
Turn On Your Handset
3 Press and hold Power/End
Turn Off Your Handset
Press and hold Power/End
4
5
Lock the Handset Keypad
You can lock the handset keypad to stop accidental dialing.
When you lock the keypad, you can still dial emergency
numbers. The softkey label doesn't display when you lock
the keypad.
Press and hold Zero (0)
displays "Press and hold 0".
Unlock the Handset Keypad
You must unlock the handset keypad to make calls. You
can however, dial emergency numbers from the locked
keypad. When you unlock the keypad, the softkey labels
appear.
Press and hold Zero (0)
"Press and hold 0" does not display on the screen.
Make a Call
1. When your handset is idle, enter the phone number
with the keypad.
2. Press Answer/Send
until the screen turns on.
Answer a Call
Press Answer/Send
Hold and Resume a Call
until the screen turns off.
1. From an active call, press Hold.
2. Press Resume to pick the call back up.
Mute Your Call
1. Press Mute
2. To unmute yourself, press Mute again.
until the screen
Create a Conference Call
1. From an active call, press Conf.
2. Enter the coworker's number and press
Answer/Send
3. Press Conf after the coworker answers.
Transfer a Call
1. From an active call, press Transfer.
until the message
2. Enter the coworker's number and press Answer/
Send
3. Press Transfer after the first ring tone or after your
coworker answers.
.
.
.
.
.
1