Table of Contents
Advertisement
Run the Ping Utility
Ping is an administration utility that tests whether a computer on the network is reachable and
measures the time it takes messages sent from the originating device to reach a destination
computer and return.
To run a ping test:
1.
Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2.
Type http://routerlogin.net or http://192.168.0.1.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Diagnostics.
In the Utility menu, Ping is selected by default.
5.
Specify the following parameters for the ping utility:
•
Target. The IP address of the ping target computer.
•
Ping Size. The size (in bytes) of the ping packet.
•
No. of Pings. The number of times to ping the target computer.
•
Ping Interval. The time between pings.
6.
Click the Start Test button.
The ping results display.
7.
To stop a ping test, click the Abort Test button.
8.
To clear the results from the display, click the Clear Results button.
WiFi Cable Modem Router Model C3000v2 and C3700v2
Manage Your Network
82
Advertisement
Table of Contents
