View Wifi Settings - NETGEAR C3000v2 User Manual

View WiFi Settings

Note: Model C3000v2 broadcasts a WiFi signal in the 2.4 GHz band. Model
C3700v2 is dual-band, so it broadcasts WiFi signals in both the 2.4
GHz band and the 5 GHz band.
To view WiFi settings:

1. Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2. Type http://routerlogin.net or http://192.168.0.1.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Click the ADVANCED tab.
The ADVANCED Home page displays.
The WiFi Settings (2.4 GHz) pane and the and WiFi Settings (5 GHz) pane for the
C3700v2 display the following information:
• Name (SSID). The WiFi network name (SSID) that the modem router uses.
• Region. The geographic region where the modem router is being used. It is illegal to
use the WiFi features of the modem router in some parts of the world.
• Channel. The operating channel of the WiFi port being used.
• Mode. The WiFi communication mode settings.
• WiFi AP. Indicates whether the modem router WiFi radio is on or off. If the WiFi radio
is turned off, the WiFi On/Off LED on the front panel is off.
• Broadcast Name. Indicates whether the modem router is broadcasting its SSID.
• WiFi Isolation. Indicates if WiFi isolation is enabled. When WiFi isolation is enabled,
WiFi clients can connect to the Internet, but cannot access each other or access
Ethernet devices on the network.
• Wi-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured for
this network.
WiFi Cable Modem Router Model C3000v2 and C3700v2
Manage Your Network
74