Factory Default Settings - NETGEAR C3000v2 User Manual

Factory Default Settings

You can return the modem router to its factory default settings.
To restore the factory default settings:

1. Locate the Reset button on the bottom of the modem router.
2. Use a paper clip or sharp object to press and hold the Reset button for more than seven
seconds.
The modem router resets and returns to the factory settings shown in the following table.
Table 5. Factory Settings
Feature
Modem router
login
Local network
(LAN)
Firewall
Internet
connection
WiFi Cable Modem Router Model C3000v2 and C3700v2
User login URL
User name and password
(case-sensitive)
LAN IP
Subnet mask
DHCP server
DHCP starting IP address
DHCP ending IP address
Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
WAN MAC address
Supplemental Information
Default Setting
http://192.168.0.1
admin / password
192.168.0.1
255.255.255.0
Enabled
192.168.0.2
192.168.0.254
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Use default hardware address
105