Black & Decker 4500 Series Manual page 13

Step 13 (Heating plate, cooking grid and warming rack assembly)
a) Place the heating plates (Y) upon the burners.
b) Place the cooking grids (X) upon the heating plates.
c) Place the warming rack (W) on the warming rack support as shown.
d) Close the top lid.
Step 15 (Assemble the LED light)
a) Put the batteries (HHH) into the pre-installed battery
box. Note the negative and positive direction.
b) Connect the LED Light cables together.
JXG4604SS
Owner's Manual
Step 14 (Assemble the grease cup with grease cup support)
a) Place the grease cup (Z) into the grease cup support from the front
level as shown.
Step 16 (Gas Tank Connection)
a) Open the cart doors.
b) Place gas tank on the tank holder and clip it using
the tank clip (G).
c) Connect the tank with regulator by screwing the
collar onto the tank valve.
d) Conduct the leak test on page 14 to make certain
all connections are connected securely.
12