Black & Decker 4500 Series Manual page 10

Step 4 (Assemble the right spare tank stopper)
a) Align the holes on the right spare tank stopper (F) with the
pre-drilled holes on the right side panel.
b) Insert one M4x10 bolt (CCC) with one M4 flat washer
(FFF) into each pre-drilled hole. Tighten bolts by hand
until secure.
c) Go back to tighten all the bolts using the screwdriver
provided.
Step 6 (Assemble doors with cart assembly)
a) Insert the bottom pin of cart left door (J) into the
pre-drilled hole on the cart bottom panel.
b) Push down the top pin of the cart left door and insert
it into the pre-drilled hole on the left end of cart front
frame.
c) Repeat the procedure for the cart right door (L)
assembly.
d) Close the two doors.
JXG4604SS
Owner's Manual
Step 5 (Assemble left spare tank clip with cart assembly)
a) Align the holes on the left spare tank clip (I) with the holes on
the bottom and back panel of cart assembly.
b) Insert one M4x10 bolt (CCC) with one M4 flat washer (FFF)
into each pre-drilled hole to connect the tank clip with cart
assembly.
c) Go back to tighten all the bolts using the screwdriver
provided.
9