Honeywell GENT Vigilon Plus Series Operating Instructions Manual page 10

Description of controls and indications
Controls
If the Verify facility has been set up, then pressing the Verify button in the event of a fire condition increases the
time delay before the sounders are activated. This gives the user time to investigate the cause of the alarm and the
option of cancelling the alarm within the delay time period.
VERIFY
These buttons can be configured during commissioning to action user-defined tasks, such as the disablement of
devices in areas where smoke may be generated due to maintenance work or where plant shutdown is required.
U1 U4
to
The two 'fire events' scroll buttons on the keyboard operate in exactly the same way as the two first level access fire
FIRE
scroll buttons on the front door. These buttons are active when the door is open.
Qwerty keypad Allows the entry of alphanumeric data at the panel, such as a label given to a zone or device.
This button is pressed to acknowledge an entry of data such as a label.
Enter
10
www.acornfiresecurity.com
www.acornfiresecurity.com