Troubleshooting; Optional Accessories - Makita CL104D Instruction Manual

TROUBLE SHOOTING
Before asking for repairs, conduct your own inspection
first. If you find a problem that is not explained in the
manual, do not attempt to dismantle the tool. Instead, ask
Makita Authorized Service Centers, always using Makita
replacement parts for repairs.
Symptom
Weak suction power
Not working
014744
NOTE:
• Do not attempt to repair cleaner by yourself.
Disposing cleaner
A Li-ion battery is built into this cleaner. Always remove it
before disposing of the cleaner.
Removing built-in battery
CAUTION:
• Do not touch the terminals with any conductive
material.
• Avoid storing battery unit in a container with other
metal objects such as nails, coins, etc.
• Do not expose battery unit to water or rain.
• Do not disassemble or alter battery unit.
• The cleaner must be disconnected from the supply
mains when removing the battery.
1. To remove the rear cover, push it in the direction of the
arrow. (Fig. 33)
2. Slide the built-in battery halfway. Disconnect the lead
wires from the battery by slightly moving back the
battery while pressing the connector in the direction of
arrow shown in the figure. (Fig. 34)
3. Then slide the battery unit completely. (Fig. 35)
4. Put the removed battery unit in a carton box so that it
is not circuit-shorted.
Installing replacement battery
To install the replacement battery, follow the removal
procedure in reverse.
CAUTION: Route the lead so that it is completely
stored inside the cleaner before putting the rear cover
back in the original position. Failure to do this may
damage the lead. (Fig. 36)
After installing the battery (see "SPECIFICATIONS"),
charge the battery before use.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
Area to be investigated
Is dust bag or paper pack full of dust?
Is dust bag clogged?
Is paper pack clogged?
Is the battery cartridge discharged?
Is the battery cartridge discharged?
Empty dust bag or paper pack.
Dust down or wash the dust bag.
Replace paper pack.
Charge the battery.
Charge the battery.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita cleaner specified in this
manual. The use of any other accessories or
attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated
purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Extension wand (Straight pipe)
• Nozzle
• Nozzle for carpet
• Shelf brush
• Corner nozzle
• Round brush
• Flexible hose
• Paper pack
• Wall mount for cordless cleaner
• Cyclone attachment
• Replacement battery
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
Cyclone attachment (Fig. 37)
About the cyclone attachment
Using the cleaner with the cyclone attachment installed
reduces the amount of dust that enters the dust bag,
which helps to prevent the suction force from weakening.
In addition, cleaning after use is also simple.
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out
any work on the tool. If the battery cartridge is left
inserted, the cleaner may start unexpectedly and result
in injury.
• Clean the mesh filter of the cyclone attachment and
the dust bag of the cleaner unit when they become
clogged. Continued use in the clogged condition may
result in heating or smoke.
Fixing method
13