Cisco Catalyst 9500 Manual page 235

Configuration Replace and Configuration Rollback
How to Use Configuration Replace and Configuration Rollback
Creating a Configuration Archive
No prerequisite configuration is needed to use the configure replace command. Using the configure replace
command in conjunction with the Cisco IOS configuration archive and the archive config command is optional
but offers significant benefit for configuration rollback scenarios. Before using the archive config command,
the configuration archive must be configured. Perform this task to configure the characteristics of the
configuration archive.
SUMMARY STEPS
1. enable
2. configure terminal
3. archive
4. path url
5. maximum number
6. time-period minutes
7. end
8. archive config
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3 archive
Example:
Device(config)# archive
Step 4
path url
Example:
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
How to Use Configuration Replace and Configuration Rollback
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enters archive configuration mode.
Specifies the location and filename prefix for the files in
the Cisco IOS configuration archive.
221