Holiday & Bypass Overrides; Allowed Overrides - Honeywell TR80 Installation And Operating Manual

3. 13. 3 Holiday & Bypass overrides
When the user activates Holiday override, the system will remain off (or in building protec-
tion mode) until the set time (number of days) expires.
When the user activates Bypass override, the system will remain in comfort mode until the
set time (number of minutes) expires.
Register
type
Holding
Holding
Holding
Holding
Holding
Holding
When the user overrides occupancy to holiday or bypass mode and sets the desired time,
the relevant remaining time register will be set to the user selected value and displayed on
the screen (for example as scrolling text "HOLIDAY FOR 7 DAYS"). The wall module will not
automatically count back from the set time. It is the responsibility of the master controller
to keep time and update the remaining days/minutes in the relevant register.

3. 13. 4 Allowed Overrides

Register
type
Holding
Holding
Holding
Holding
TR80 - Installation and Operation Guide
Relative Absolute
Dir
Address Address
2501 42502 R/W
2502 42503 R/W
2503 42504 R/W
1502 41503 R/W
1503 41504 R/W
2509 42510 R/W
Relative Absolute
Dir
Address Address
2504 42505 R/W
2505 42506 R/W
2506 42507 R/W
2507 41508 R/W
Config
Name
parameter
Holiday
501
default time
Bypass
502
default time
Bypass
503
adjust step
Bypass
remaining -
minutes
Holiday
remaining -
time
Bypass time
509
max
Config
Name
parameter
Allowed overrides
504
from OFF
Allowed overrides
505
from UNOCC
Allowed overrides
506
from STANDBY
Allowed overrides
507
from OCC
Unit Range
days 1-45 or unlimited
10-1440 mins
mins (or 65535 =
unlimited)
0: 10 mins
1: 20 mins
enum
2: 30 mins
3: 60 mins
Int
int
mins 30-1440 mins
Range
bit0: unused
bit1: unused
bit2: Allow override to
OCCUPIED
bit3: Allow override to OFF
bit4: Allow override to
HOLIDAY
bit5: Allow override to UNOCC
bit6: Allow override to
STANDBY
bit7: Allow override to BYPASS
Default
value
7 days
180
mins
2
0
0
180
mins
Default
value
0
144
148
176
48