Intended Use - Bosch Rexroth PS5000 Comissioning, Operating Instructions

1070080078 / 03 BT 6.00
Safety Instructions
1.3

Intended Use

The product described
D serves in connection with a suitable weld timer (PS 5000, PS 6000) to
− display and change parameters
− display and reset faults
and
D is suitable for operation in industrial environments (emission class A,
group 2) in accordance with the following standards:
− EN 50081-2
− EN 50082-2
− EN 60204-1
It is not intended for any other use!
DANGER
Risk of high-frequency interference!
This resistance welding equipment belongs to class A.
Resistance welding equipment class A is not intended for use in
the public low-voltage network supplying, e.g., residential build-
ings, because it may interfere with other equipment in the environ-
ment.
DANGER
Any use other than for the purpose indicated may result in per-
sonal injury of the user or third parties or in damage to equipment,
the workpiece to be welded, or environmental damage.
Therefore, our products must never be used for any other than
their respective intended purpose!
For operation in residential environments, in trade and commercial
.
applications and small enterprises, an individual permit of the na-
tional authority or test institution is required; in Germany, please
contact the Regulierungsbehörde für Telekommunikation und
Post (RegTP) or its local branch offices.
The faultless, safe functioning of the product requires proper transport,
storage, assembly and installation as well as careful operation.
Electric Drives Bosch Rexroth AG
and Controls
1−3