Digicom BlueGATE User Manual page 16

BlueGATE
PREFACE
All rights reserved; no part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, otherwise, without the prior written permission of Digicom S.p.A.
The following installation rules should be respected in order to have the best working order of the equipment
and for the user's safety.
ENVIRONMENTAL CONDITIONS
Enviromental temperature Relative humidity
from 0 to +45°C
Rapid changes of temperature or humidity should be avoided
This equipment, including cables, should be installed in an area free from:
Dust, humidity, heat from direct sun light.
Objects which irradiate heat. These could cause damage to the container or other problems.
Objects which produce a strong electtromagnetic field (loudspeakers, etc.)
Liquids or chemical corrosive substances.
GENERAL WARNINGS
To avoid electric shock, no not open the equipment. Ask qualified personnel for help. Disconnect the power
cable from the wall outlet when the equipment is not to be used for a long period. To disconnect the cable
pull it by the plug, never pull it by the cable itself. If there should be liquid or object penetration in the
equipment, disconnect the power cable and call a qualified personnel for testing.
CLEANING THE TERMINAL
Use a clean and soft cloth and do not use solvents.
VIBRATIONS OR DROPPING
Caution against vibrations and dropping.
DECLARATION
We, Digicom S.p.A. registered office at: via Volta 39 - 21010 Cardano al Campo (Varese - Italy) declare
under our sole responsability that the product:
Name: BlueGATE satisfies the basic requirement of the below indicated Directive:
1999/5/CE of March 9 1999, R&TTE
as having been designed in conformity with the requirements of following Reference Standards:
EN 301 489-17 EN 301 489-1 EN 300 328-1 EN 300 328-2 EN 60950
from 20 to 80% n.c.
OF CONFORMITY
II
Preface