Makita FS2700 Repair Manual page 5

R
epair
[4] DISASSEMBLY/ ASSEMBLY
[4]-3. Replacing Armature
1) Loosen three 4x25 Tapping screws and remove Handle cover complete and Carbon brushes. (Fig. 14)
2) Loosen three 4x30 Tapping screws and remove the assembled parts of Gear housing, Gear housing cover and Armature
from Motor housing. (Fig. 15)
3) Remove Armature ass'y with Labyrinth rubber ring from Gear housing cover.
Armature ass'y can be disassembled as illustrated in Fig. 16. Use 1R269.
4) Take the disassembling step in reverse.
Note: Be sure to face the depressed portion of Ring 7 to Armature shaft gear end. (Fig. 17) Markings of ">PC<" "7"
are shown on the depressed portion.
Fig. 14
Handle cover
complete
4x25 Tapping
screw (3pcs.)
Motor
housing
Fig. 16
Ball bearing 608VV
Ring 7 (viewed
from flat side)
Fan 52
Armature ass'y
Fig. 15
4x30 Tapping Gear housing
screw (3pcs.) cover complete
Gear housing
Armature ass'y
complete
Insulation
washer
Ball bearing
607ZZ
Labyrinth
rubber ring
Fig. 17
Ring 7 (viewed from depressed side)
Armature gear
shaft end
(marking)
>PC<
Ball bearing 608VV
P5/ 7
(marking)
7
Fan 52