For Vigor2910V - Draytek Vigor 2910 Quick Start Manual

1 . 1 . 4 F o r V i g o r 2
1 . 1 . 4 F o r V i g o r 2
L E D E x p l a n a t i o n
L E D E x p l a n a t i o n
Phone
ACT DMZ FXS1 FXS2
LED Status
ACT (Activity) Blinking
Off
DMZ On
FXS1/FXS2 On
Blinking
VPN On
Printer On
WAN(W1-W2) Orange
Green
Blinking
Orange
LAN (P1, P2,
P3, P4)
Green
Blinking
C o n n e c t o r E x p l a n
C o n n e c t o r E x p l a n
PWR
Printer
Interface Description
Printer Connecter for a USB printer.
PWR Connecter for a power adapter with 12-15VDC.
ON/OFF Power Switch.
FXS2 & FXS1 Connecters for telephone set and analog phone with VoIP communication.
LAN P4 – P1 Connecters for local networked devices.
W2/W1 Connecter for accessing Internet with the ADSL,ADSL2/2+ line
Factory Reset Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
9 1 0 V
9 1 0 V
WAN
/
VPN Printer W1 W2 P1
Explanation
The router is powered on and running properly.
The router is powered off.
DMZ Host is specified in certain site.
The phone is off hook (the handset of phone is hanging).
A phone call is incoming or on-line.
The VPN tunnel is launched.
The USB interface printer is ready.
A normal 10Mbps WAN link is ready.
A normal 100Mbps WAN link is ready.
Ethernet packets are transmitting.
A normal 10Mbps connection is through its corresponding
port.
A normal 100Mbps connection is through its corresponding
port.
Ethernet packets are transmitting.
a t i o n
a t i o n
FXS2 FXS1 P4
LAN
P2 P3 P4
P3 P2 P1/W2
5
Factory
W1 Reset