For Vigor2910Vg - Draytek Vigor 2910 Quick Start Manual

1 . 1 . 5 F o r V i g o r 2
1 . 1 . 5 F o r V i g o r 2
L E D E x p l a n a t
L E D E x p l a n a t
ACT DMZ
LED
ACT (Activity)
DMZ
FXS1/FXS2
WLAN
Printer
WAN(W1-W2)
LAN (P1, P2,
P3, P4)
C o n n e c t o r E x
C o n n e c t o r E x
Printer
Interface
Printer
PWR
ON/OFF
FXS2 & FXS1
LAN P4 – P1
W2/W1
Factory Reset
9 1 0 V G
9 1 0 V G
i o n
i o n
Phone WAN
FXS1 FXS2 WLAN Printer W1
Status Explanation
Blinking The router is powered on and running properly.
Off The router is powered off.
DMZ Host is specified in certain site.
On
On The phone is off hook (the handset of phone is hanging).
Blinking A phone call is incoming or on-line.
On Wireless access point is ready.
Blinking Wireless traffic goes through.
Off Wireless access point is turned off.
On The USB interface printer is ready.
Orange A normal 10Mbps WAN link is ready.
Green A normal 100Mbps WAN link is ready.
Blinking Ethernet packets are transmitting.
Orange A normal 10Mbps connection is through its corresponding port.
Green A normal 100Mbps connection is through its corresponding
port.
Blinking Ethernet packets are transmitting.
p l a n a t i o n
p l a n a t i o n
FXS2 FXS1
PWR
Description
Connecter for a USB printer.
Connecter for a power adapter with 12-15VDC.
Power Switch.
Connecters for telephone set and the analog phone with VoIP communication.
Connecters for local networked devices.
Connecter for accessing Internet with the ADSL,ADSL2/2+ line
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly than
usual, release the button. Then the router will restart with the factory default
configuration.
LAN
/
W2 P1 P2 P3 P4
P4 P3 P2 P1/W2
6
Factory
W1 Reset