Installing Or Removing Battery Cartridge; Functional Description - Makita DUB363 Instruction Manual

4. Turn the suction pipe clockwise so that the bolt
on the pipe is aligned with the hole on the main unit,
and then fasten the bolt firmly using the hex wrench to
secure the pipe to the main unit.
► Fig.12: 1. Suction pipe 2. Bolt
To remove the suction pipe and nozzle, perform the
installation procedure in reverse.
Installing or removing elbow pipe
and dust bag
Optional accessory
1. Insert the elbow pipe into the dust bag and tighten
the belt to fix the elbow pipe as shown in the figure.
► Fig.13: 1. Dust bag 2. Elbow pipe 3. Belt
2. Attach the elbow pipe to the main unit.
Insert the elbow pipe into the main unit with the bolt
facing left as shown in the figure. Turn the elbow pipe
as shown in the figure so that the bolt is aligned with the
hole on the main unit, and then tighten the bolt firmly
using the hex wrench.
► Fig.14: 1. Bolt 2. Elbow pipe
3. Attach the hook of the dust bag to the sub handle
as shown in the figure.
Adjust the length of the strap, and then fold extra strap
and fix it with hook and loop fastener.
► Fig.15: 1. Hook 2. Sub handle
4.
Attach the hooks of the shoulder strap to the carry
handle and sub handle as shown in the figure.
Make sure that the buckle is on the carry handle side.
► Fig.16: 1. Hook 2. Carry handle 3. Sub handle
4. Buckle
To remove the dust bag and elbow pipe, perform the
installation procedure in reverse.
When installing the small dust bag, open the fastener,
then insert the elbow pipe into the dust bag, and then
close the fastener. Lock and tighten the belt to fix the
elbow pipe.
► Fig.17: 1. Fastener 2. Dust bag 3. Belt 4. Elbow
pipe
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before adjusting or checking function on the
machine.
Installing or removing battery
cartridge
CAUTION:
Always switch off the machine
before installing or removing of the battery
cartridge.
CAUTION:
Hold the machine and the battery
cartridge firmly when installing or removing bat-
tery cartridge. Failure to hold the machine and the
battery cartridge firmly may cause them to slip off
your hands and result in damage to the machine and
battery cartridge and a personal injury.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the machine, causing
injury to you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
► Fig.18: 1. Red indicator 2. Button 3. Battery
cartridge
To remove the battery cartridge, slide it from the
machine while sliding the button on the front of the
cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
► Fig.19: 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps
Lighted
13 ENGLISH
Off Blinking
malfunctioned.
Remaining
capacity
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have