Exception Handler - Panasonic GA-ML Series Manual

6.4. Exception Handler

Press X on the Switch Tools Configuration menu, and then you can see "Exception
Handler" as Figure 6-6. This screen allows you to configure the operation during
the exception handling (or processing).
PNxxxxxx Local Management System
Switch Tools Configuration -> Exeption Handler Menu
Exception Handler:
Exception Handler Mode:
-------------------------------- <COMMAND> -----------------------------------
Enable/Disable E[x]ception Handler
Set Exception Handler [M]ode
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Screen Description
Exception Handler
Exception Handler Mode Displays the method of an exception handling. The factory default
Disabled
Debug Message & System Reboot
Figure 6-6: Exception Handler
Displays the status (or condition) of the function of an exception
handling. The factory default settings is set to "Disabled".
Enabled
Disabled
settings is "Debug Message".
Debug Message
System Reboot
Debug Message and
System Reboot
185
Indicates that an exception handling is enabled.
Indicates that an exception handling is disabled.
When detecting an exception handling, output a
debug message on a console.
When detecting an exception handling, reboot
automatically.
When detecting an exception handling, output a
debug message on a console before rebooting
automatically.