Rrp Domain Creation Menu - Panasonic GA-ML Series Manual

4.10.2. RRP Domain Creation Menu

Press C (command) on the screen of the Ring Redundant Protocol Configuration,
and then you can see RRP Domain Creation Menu as Figure 4-48. You can create a
RRP domain on this screen.
PNxxxxxx Local Management System
RRP Management -> RRP Domain Creation Menu
RRP Domain Name :
Primary Port
Secondary Port
Polling Interval : 1
Control VLAN
Data VLAN
-------------------------------- <COMMAND> -----------------------------------
Set RRP Domain [N]ame
Set [P]rimary Port
Set P[o]lling Interval
Set [C]ontrol VLAN
[A]pply
Command>
Enter the character in square brackets to select option
Screen Description
RRP Domain Displays a domain name.
Name
RRP Node Type Displays a node role.
Master
Transit
Primary Port Displays a primary port.
Secondary Port Displays a secondary report.
Polling Interval Displays the polling interval.
Fail Period Displays the time-out time for the polling.
Control VLAN Displays a VLAN ID to be controlled.
Data VLAN Displays a VLAN ID for data.
:
:
:
:
Figure 4-48: RRP Domain Creation Menu
Indicates a switch to control a ring operation. Set a machine only
in the domain for a master node.
Indicates a switch other than the master node.
RRP Node Type :
Fail Period : 2
Set Node [T]ype
Set [S]econdary Port
Set [F]ail Period
Set [D]ata VLAN
[Q]uit to previous menu
151