Wireless Lan Computer Limitation; Wds - Buffalo AirStation WBR-G54 Owner's Manual

Manual IP and MAC Address As sign ment
- Allows administrator to add additional
leased IP addresses tied to a specifi c
MAC address. When a specifi c MAC ad-
dress connects to the AP, the IP address
specifi ed will be given to that client.
Display/Delete lease information - List
of IP addresses, MAC addresses, lease
periods and status is displayed.
4. 1 .4 Wireless LAN Computer
Lim i ta tion
This option limits the PCs allowed a wire-
less connection to the AirStation. It is
used to control the wireless connections
to the access point.
Wireless PC's Connection - Select Limit to
restrict the connection and Do not Limit
for open access. Register your client PC's
MAC address before selecting Set.
Register for allowable PC's MAC address
- MAC access restriction set up in LAN.
Input the MAC addresses that to be al-
lowed to communicate.
MAC address list - Display a table list of
all MAC addresses.

4.1.5 WDS

Wireless LAN PC connection: Select
Enable or Disable wireless PCs from com-
munication with the AirStation. If set to
Disable, WDS (peer-to-peer AP connec-
tion) is still available.
WDS Function: Select Enable to allow
WDS mode between AirStations or Dis-
able to block communication between
AirStations.
n
Note: Both AirStations must be of the
same type.
Add AirStation (MAC Address): Allows
administrator to register the wireless MAC
address of AirStations for point-to-point
or point-to multipoint communication
between AirStations. The MAC address to
enter is found in the Management
section, under System Information/
Wireless MAC address section. The
WDS function must be set to Enable.
The MAC address is 12 characters
long.
Enter the Wireless MAC address in
the form of two characters separated
by a colon and click Add. Up to six
sets may be registered.
Figure 4.1.4
Wireless LAN
Computer
Limitation
Figure 4.1.5
WDS
11