Wan Port - Buffalo AirStation WBR-G54 Owner's Manual

Figure 4.2.1A

WAN Port

Settings
Figure 4.2.1B
WAN Port
Settings
Fig ure 4.2.2
Network
Setup of
WAN
12
4. 2 WAN Settings
4. 2 . 1 WAN Port
Communication Method of Wired WAN
- Select port speed and type of duplex
connecting to the WAN port. If unknown,
select Auto negotiation.
MAC Address of WAN - Set the AirStation
MAC address to be used for WAN com-
mu ni ca tion.
IP Address of WAN - Allows administrator
to select DHCP server, PPPoE, or manual
setting for the WAN port of the AirStation.
Auto IP assignment from DHCP server - ac-
quire the IP address automatically from
the DHCP server.
Use PPPoE client - If selected, the in for -
ma tion listed below must be entered.
Manual setting - Enter the appropriate IP
address and subnet mask.
PPPoE Setting (for enabling PPPoE Client
function) - Allows administrator to use
PPPoE as specifi ed by the ISP. The fol-
lowing parameters should be entered:
User Name - Enter the user name (up to
64 alphanumeric characters) for PPPoE
au tho ri za tion.
Password - Enter password provided by
ISP (up to 64 alphanumeric characters).
Reenter password in the Confi rmation
box.
Service Name - Enter the PPPoE service
name (up to 64 alphanumeric characters).
If ISP doesn't require service name, leave
blank.
Connection Type - Select from:
• Continuous Connection - Connects
im me di ate ly after setting and never
dis con nects.
• Connect on Demand - Reconnects when
the Disconnect time elapses.
• Manual - Disables Automatic Con-
nec tion. Connects to Internet using the
Connect button on the initial settings
page.