Specifications; Power Supply - Makita DML809 Instruction Manual

ENGLISH
(Original instructions)

SPECIFICATIONS

Model
LED
Power source
Dimensions (L × W × H)
Net weight
Pressure receiving area (Lens area)
• Specifications may differ from country to country.
• The dimensions are with the handle lowered position.
• The weight does not include battery cartridge and power cord.
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.

Power Supply

• The appliance should be connected only to a power supply of the same voltage as indicated on the nameplate,
and can only be operated on single-phase AC supply. The appliance is double-insulated and can, therefore,also be
used from sockets without earth wire.
Applicable battery cartridge and operating time
Voltage Applicable battery cartridge
14.4V
18V
• The operating time is based on the condition when two batteries are inserted.
• Some of the battery cartridges listed above may not be available depending on your region of residence.
• Operating times may differ depending on battery type, charging status, and usage condition.
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or fire.
BL1415N
BL1430,
BL1430B
BL1440
BL1450
BL1460B
BL1815N
BL1820
BL1820B
BL1830,
BL1830B
BL1840,
BL1840B
BL1850,
BL1850B
BL1860B
DML809
96pcs, 100.8W
14.4V / 18V DC
249 mm × 370 mm × 278 mm
5.7 kg
0.0241 m
Operating time (Approximately)
High
0.3 hours 0.8 hours
0.5 hours 1.3 hours
0.8 hours 2.1 hours
0.9 hours 2.5 hours
1.0 hours 2.8 hours
0.4 hours 1.1 hours
0.5 hours 1.5 hours
0.6 hours 1.5 hours
0.8 hours 2.0 hours
1.1 hours 2.9 hours
1.4 hours 3.5 hours
1.7 hours 4.5 hours
2 English
2
Mid Low
1.7 hours
2.8 hours
4.5 hours
5.0 hours
5.5 hours
2.2 hours
3.0 hours
3.0 hours
4.0 hours
6.0 hours
7.5 hours
8.5 hours