Advertisement
Configuring your camera with IP
Installer (continued)
After you click on the Link button,
IP Installer will automatically open
your Internet browser to the IP
Address of the DCS-5300W, in this
example it is: http:// 192.168.0.146
Your DCS-5300W may have a
different IP Address.
Click on Configuration to set up your
wireless settings for the DCS-5300W
to be consistent with your network.
Leave the box titled This camera can be found by installer whenever it
starts up unchecked to avoid running this install application each time you
boot up the DCS-5300W. Check this box if you need to change IP address
the next time the DCS-5300W boots up.
If you have a DHCP server on your
network, you will already have a valid
IP Address in these fields.
If you will be using the DCS-5300W in
a wireless network, the following page
explains the importance of each field
and what is required for you to be
able to connect to your network.
If you do not have a DHCP server on
your network, fill out your IP Ad-
dress, Subnet mask, Gateway and
at least 1 DNS IP Address respec-
tively on this page. If you do not know
what to put in these fields, please
contact your System Administrator or
your Internet Service Provider.
Click Apply
6
Advertisement
