Table of Contents
Advertisement
Connect to the Appliance
Router: 192.168.42.1
•
Click OK.
Step 7
The Cisco C190 appliance has two gigabit network ports:
and
. At least one static IP address is required to send and receive
Data 1
Data 2
email.
You can receive and deliver email from a single connection to either network
port if your network topology dictates it. Two IP addresses can be configured on
one network interface.
Alternatively, you can connect the
and connect the
Data 2
To access the appliance by Ethernet, connect to
interface and configure incoming email on
For serial access to the appliance, connect to the console port.
Item
Port
1
Remote
Power Cycle
2
Console
3
Data 1
4
Data 2
Data 1
network port to your public network
network port to your private network.
Data 2
Description
The port that is used for Remote
Power Cycle (RPC).
The console port that directly
connects a computer to the
appliance.
A Gigabit Ethernet customer data
interface. This port is used as a
management interface.
A Gigabit Ethernet customer data
interface.
Data 1
as your management
.
7
Advertisement
Table of Contents
