Table of Contents
Advertisement
For Windows
For Mac
6
The exact steps depend on your operating system version.
Go to the Start menu and choose Control Panel.
Step 1
Click Network and Internet, then Network and Sharing Center.
Step 2
Click the Change adapter settings link.
Step 3
Right-click Local Area Connection and choose Properties.
Step 4
Click Internet Protocol Version 4, then choose Properties.
Step 5
Note your current settings.
Step 6
Select Use the Following IP Address.
Step 7
Enter the following changes:
Step 8
IP Address: 192.168.42.43
•
Subnet Mask: 255.255.255.0
•
Default Gateway: 192.168.42.1
•
Click OK and Close to exit the dialog box.
Step 9
The exact steps depend on your operating system version.
Launch the Apple menu and choose System Preferences.
Step 1
Click Network.
Step 2
Click the lock icon to allow changes.
Step 3
Select the network configuration with the green icon. This is your active
Step 4
connection. Then click Advanced.
Click the TCP/IP tab and from Ethernet settings, choose Manually from
Step 5
the drop-down list.
Enter the following changes:
Step 6
IP Address: 192.168.42.43
•
Subnet Mask: 255.255.255.0
•
Advertisement
Table of Contents
