Table of Contents
Advertisement
Disable LED Blinking or Turn Off LEDs
The router LEDs on the top panel indicate router activities and behavior. You can disable
LED blinking for network communications, or turn off all LEDs except the Power LED.
To disable LED blinking or turn off the LEDs:
1.
Launch an Internet browser from a computer or mobile device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > LED Control Settings.
By default, the Enable blinking on Internet LED, LAN LED, Wireless LED, and USB
LED when data traffic is detected radio button is selected, which allows standard LED
behavior. For information about standard LED behavior, see
descriptions
on page 10.
5.
To disable blinking, select the Disable blinking on Internet LED, LAN LED, Wireless LED,
and USB LED when data traffic is detected radio button.
6.
To turn off the LEDs, select the Turn off all LEDs except Power LED radio button.
7.
Click the Apply button.
Your change takes effect.
View the WAN Settings
You can view or configure wide area network (WAN) settings for the Internet port. You can
set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and
enable the router to respond to a ping to its WAN (Internet) port.
To view the the WAN settings:
1.
Launch an Internet browser from a computer or mobile device that is connected to the
network.
AC1750 Smart WiFi Router
Specify Network Settings
106
Table 1, LED and button
Hide quick links:
Advertisement
Table of Contents
