Table of Contents
Advertisement
ENGLISH (Original instructions)
SPECIFICATIONS
Dimensions (L X H X W)
Min. hose diameter
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear safety glasses.
･
Do not use on scaffoldings, ladders.
Noise
The typical A-weighted noise level determined according
to EN792:
Model AN923
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model AN943
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration emission value determined according to
EN792:
Model AN923
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model AN943
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model
Air pressure
Nail Iength
Nail capacity
Net weight
) : 89 dB(A)
pA
) : 102 dB(A)
WA
) : 92 dB(A)
pA
) : 105 dB(A)
WA
2
) : 4.0 m/s
h
2
2
) : 3.5 m/s
h
2
AN923
64 - 74 pcs.
559 mm X 347 mm X 109 mm
END106-3
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
ENG905-1
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We
Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Pneumatic Framing Nailer
ENG904-1
Model No./ Type: AN923,AN943
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN792
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
2
0.44 - 0.83 Mpa (4.4 - 8.3 bar)
50 mm - 90 mm
60 - 84 pcs.
455 mm X 365 mm X 109 mm
8.5 mm
4.0 Kg
Corporation
as
AN943
ENG901-1
ENH003-13
the
responsible
Advertisement
Table of Contents
