Makita DUR366L Instruction Manual page 10

•
The declared vibration emission value has been
measured in accordance with the standard test method
• and may be used for comparing one tool with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
and attention. tool can differ from the declared emission
the tool is used.
............Read instruction manual. • Be sure to identify safety
operator that are based on an estimation of exposure in
10
ENG901-1
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.......................Take particular care
value depending on the ways in which
measures to protect
END229-1
the