Makita 191D73-9 Instruction Manual page 5

NOTE
• Check that the cyclone attachment, cleaner, and straight pipe are all connected
securely before use.
• Always use the cleaner with the dust bag or paper dust pack installed, even
when using the cyclone attachment.
• Using the cleaner without the dust bag or paper dust pack installed may result in a motor
malfunction.
• Empty the dust case of the cyclone attachment and the dust bag or paper dust
pack of the cleaner when dust has accumulated.
• Continued use will result in weakened suction force.
Notes on operation and storage
NOTE
• Store the cleaner in a stable condition in a stable location.
• If the cleaner is left in an unstable condition, such as stood against an unstable
location, it may fall over and break or the dust case may come off.
Disposing of dust
If too much dust accumulates in the dust case, clogging may easily occur and
the suction force may weaken.
• When dust has accumulated up to the full line of the dust case, follow the procedure
below and dispose of the dust.
1. Hold the dust case firmly, press and hold the two buttons, and remove the dust case.
Fig. 2 : 1. Full line 2. Dust case 3. Button (2 locations) 4. Mesh filter
2. Dispose of the dust inside the dust case and remove any dust and powder adhered
to the surface of the mesh filter.
3. Install the dust case.
• Insert the dust case all the way until the two buttons lock with a "click."
Fig. 3 : 1. Dust case 2. Button (2 locations)
CAUTION
5