Table of Contents
Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
APPENDIX A - CERTIFICATION AND REFERENCE DOCUMENTS
General
1.
A.
Reference Documents
(1)
SP-90600571 - Small Satcom External ICD.
(2)
SP-90600570 - Small Satcom System Requirements Document.
B.
Regulatory
(1)
47 CFR, US FCC Title 47 CFR: Part 87 for Aeronautical classes (section §87.139 Emissions
Limitations).
(2)
European Regulation (EC) No. 1907/2006 concerning the Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH).
Radio Transmission Licensing
2.
A.
FCC and IC
(1)
This product has been certified with the following license Ids:
– FCC-ID: K6KSMALLSATCOM.
– IC-ID: 1275B-SMALLSATCOM.
(2)
The radio transmission is licensed in accordance to 47 CFR part 87 [RD7] by the operator of
the aircraft or fleet
(3)
As per 47 CFR part 87.39 the acceptability of the equipment for licensing is achieved by
obtaining FCC certification, as per 47 CFR [RD7] part 2 Subpart J Section 2.1033. The FCC ID
received is marked on the physical nameplate of all non-prototype certified equipment.
(4)
Pursuant to section 1.925 of 47 CFR of the Commission's rules, Honeywell International Inc. has
been granted waivers of Sections 87.131, 87.133, 87.137, 87.139(i)(1) and 87.141(j) of the
FCC rules. The waivers of these sections permit the FCC certification of the Small SATCOM
transceiver to support the Inmarsat SwiftBroadband aircraft communications services. The
waivers of these sections have been granted uncondtionally. This device has been tested and
found to comply with the remaining sections of Part 87 of the FCC rules, thefore the conditions
of the waiver are met at all times.
(5)
As per Canadian Radio Communication Regulations SOR/96-484 [RD15], 21(1) Innovation,
Science and Economic Development Canada (ISEDC) Technical Acceptance Certification is
required. The ISEDC ID received is marked on the physical nameplate of all non-prototype
certified equipment.
(6)
The FCC and ISEDC complies with DO-262D section 2.1.3 Note 1.
(7)
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SMALL SATCOM
Page 44
18 Feb 2021
Advertisement
Table of Contents
