Table of Contents
Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
COMPONENT
Indoor Unit
(6)
The Indoor Unit has all the connectors on one side. This simplifies the installation of the
Indoor Unit in a crowded avionics bay, as the box can be pushed into a corner or small gap
between other equipment.
(7)
An LED on the Indoor Unit provides an indication of its status. More detailed information can
be accessed over the Ethernet connection.
Antenna
3.
A.
Antenna Description
(1)
The antenna will typically be mounted externally.
(2)
A single RF cable connects the indoor unit to the antenna.
(3)
Table 3 provides the specifications for the antenna.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SMALL SATCOM
Table 2. Indoor Unit Component Specifications
CHARACTERISTIC
Part Number
Length
Width
Height
Mounting Information
Weight
Power Consumption
Operating Voltage
Cooling
Storage Temperature
Operational Temperature
SPECIFICATION
90600511
5.5 in. (140 mm) maximum
2.95 in. (75 mm) maximum
2 in. (50.8 mm) maximum
Mounted inside the fuselage
1.1 Lbs (0.5 kg) maximum
50 W for high use
65 W maximum
20 W in standby
27-30V DC
Refer to Section 3, Paragraph 7.B.
-55 to 85°C (-67 to 185°F)
Refer to Section 3, Paragraph 7.B.
Page 4
18 Feb 2021
Advertisement
Table of Contents
