Table of Contents
Advertisement
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
B.
Hardware Part Numbers
(1)
At the time of writing of this document, the SATCOM Products were identified by the hardware
part numbers indicated in Table 1.
SATCOM PRODUCT
Indoor Unit
Low Gain Antenna
Harness Assembly
Coaxial Cable Assembly
SIM Card SBB
(2)
Where:
– A change to form fit or function will be reflected in a new base part number.
(3)
The terminal is designed but not certified to DO-254 design assurance level (DAL) E
– Hardware functions whose failure or anomalous behavior, as shown by the hardware safety
assessment, would cause a failure of system function with no effect on UAV operational
capability or UAV flight operator workload. No guidance from DO-254 applies.
2.
Indoor Unit
A.
Indoor Unit Description
(1)
The Indoor unit contains the modem, digital and RF circuitry.
(2)
The Indoor unit requires a combined power input and Ethernet cable which will be provided.
The DC power input powers the whole system.
(3)
The satellite data transfer, command, monitoring and debug are via Ethernet.
(4)
A SIM card must be inserted into the indoor unit for it to operate.
(5)
Table 2 provides the specifications or the Small SATCOM's Indoor Unit.
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SMALL SATCOM
Table 1. Small SATCOM Kit Part Numbers
HARDWARE PART NUMBER
90600511
89000015-009
90600551
90600596
90100090
Page 3
18 Feb 2021
Advertisement
Table of Contents
